Kit Includes:
(8) +5 Chromoly plate A-arms
(4) 2.0 King Coilovers wi/ Billet Piggy back Reservoirs
(4) 300M axles
(2) Billet Tie Rod Extensions
(4) Uni-Balls Preinstalled for your convenience
(4) 17-4 Stainless Steel Tapered pins
CONSTRUCTION:
Our Kawasaki Teryx Long Travel kit was designed as a 100% bolt on kit. No drilling is required for any of the A-arm pivots on the frame side as well as any of the hub carrier points. It is constructed from 4130 Chromoly plate box tubing and fully TIG welded for the ultimate design in rigidity and toughness. Delivering you a suspension system that will take all the abuse you can throw at it. Back that by our unconditional life time guaranty on all A-arms and you have the best long travel kit available
SPECIFICATIONS:
After extensive R&D on our Kawasaki Teryx suspension we finalized a 5" over stock increase in A-arm length per side with a wheel base alteration combined total of over 2&rdquo to minimize push in the corners and give ample tire clearance with an aggressive look..
PERFORMANCE:
Wheel travel was set at 14" in the front to prevent C/V binding at full droop with the wheels turned and a 14” of travel in the rear to keep the back tires from hitting the bed sides. Don’t be fooled by ads stating 15" plus inches of wheel travel, those kits put the front out board C/V’s in a bind at full droop and put the rear tires into the bed sides at full compression. Our specifically valved shock made specifically for our kit by King Shocks combined with our engineered suspension system will out perform a ill handling off the shelf system with shocks you need to adjust so they work and some extended A-arms.
All Chassis pivot points are precision machined consisting of a weld on bung for the A-arm, that allows you use the stock bushings and crush sleeve. Both front upper and lower A-arms use a stainless steel WSSX-14 series spherical bearing ( 7/8 Wide series Uni-Ball) to handle the punishment, NO stock ball joints here. The bearings are complimented by our own 17-4 stainless steel misalignments, taper pins and adapters for maximum articulation of the larger bearing. All of our Uni-balls use the highest quality 12pt grade 8 hardware that has been plated for maximum protection and longevity.
Last but not least our system is complimented by our own 300M torsion axles, we do not buy these from anyone else and should not to be confused with inferior 4340 axles designs.
QUALITY ASSURANCE:
All of our kits ship with all 16 Delrin pivot Assemblies and all 4 Uni-Balls preinstalled for your convenience. As a final quality assurance test, every A-arm goes threw a final packaging Q/C fixture to make sure that you will not need a come-a-long, a ratchet strap, a sledge hammer or a grinder to install our A-arms.
INSTALLATION:
•Total installation time is 5-7 hours
•Professional technical support